Happy to know you. We are a manufactuer of corrugated cartons machinery from China, established in 1985,production speed:60-220mm,the paperboard can be 3/5/7/ply,width:1400mm-2200mm, flute profiles:A,C,B,or E, Main Products Parts: RS-1500H Shaftless hydraulic pressure mill roll Stand RS-1500S Shaftless power operated mill roller stand SF-280S Single facer SF-320S/360S Single Facer MH-900T Multiple pre-heater DF-800 Baker and shape design system Double decks feeding across GL-240D Gluing machine SS-100P Thin edge slitter scorer SS-200N N.C thin edge slitter scorer NC-N N.C Cutoff
Type: Fingless single facer. Upper and lower corrugating rolls are made of Ni-Cr-Mo alloy steel, with heated-treatment for hardness SHORE 700 or more, and the surface is well treated by grind and plated-chrome. Bearing for upper/lower corrugating roll, and pressure roll, uses high-temperature lubrication to keep running smoothly and durably. Adjustment for upper corrugating roll, pressure roll, and glue roll, is controlled by pneumatic system. This machine equips with pre-heater and pre-condition steam shower. With motorized dividing-glue device.
The diameter of pre-heating roller: 1000 mm. Paper guide rollers, 3 fixed, the other 3 traveling upon outside of pre-heating roller. The position of paper guide roller is adjusted with electric.
According to cardboard types, they have Single, Double, Triplex BRIDGE CONVEYOR. With UP-guide conveyor installed upon each SINGLE FACER.
Level-type conveyor--1, 2, 3 layer, could guide single face from each SINGLE FACER to DOUBLE, TRIPLEX, FOURFOLD PREHEATER. Paper width and left-right movement are adjusted by electric device. With sucking-brake device, and the tension of the corrugated board is controlled by pneumatic system. With 2 sets of operational panels, and it could be operated at upper bridge or lower bridge. With safety rails at two sides and staircases.
The surface of glue roller with netting dents, engraving, and plated-chrome treatment. The surface of ductor roller is well treated by grind and plated-chrome. The adjustment of pressure roller is controlled by pneumatic system. This machine equips with preheating roller. The Clearance between glue roller and ductor roller; glue roller and pressure roller, is controlled by electric mirco-adjustment and digital indication.
Heating plate: height: 150 mm. Around 12 PCs to 20 PCs. Grind and plated-chrome treat the surface. Weight roller: 6 pieces of weight roller for each heating plate. Besides, hydraulic system controls its lifted/lower adjustment. 3-stage adjustable pressure for weight roller is controlled by pneumatic system. Tension control and right/left adjustments of upper Cotten Belt are controlled by pneumatic system. Tension control and right/left adjustments of lower Cotton Belt are controlled by manual.
Using when making an order change or to remove poor quality sheet. Upper and lower knives' gear with heat treatment and precisely grind. Main motor: 10HP, with reducing, brake, and clutch unit equipment. When the "cut" button is pushed, the clutch is engaged and the sheet is cut. When the sheet has been cut, the clutch disengages. The brake will emergently stop the upper and lower knives; this allows sheets to pass from Rotary Shear to Slitter Scorer.
One station scoring and slitting tool. Slitting capacity: 4 out(slitting tool: 5 sets, and scoring tool: 8 sets). Slitting and scoring bracket's shaft: with 120 mm in diameter and the surface is well treated by grind and plated-chrome. Diameter of slitting tool: 270 mm (with thin blade). Diameter of scoring tool: 224 mm. Minimum slitting size: 135 mm. Minimum scoring size: 110 mm. Pneumatic system controls raising and lowering of slitting and scoring tool, and order can be easily changed during the machine running without stopping it. Slitting and scoring size are adju