Product Description:
FULLY AUTOMATIC HYDRAULIC TYPE CLAMP CARRIER
The system includes an automatic hydraulic tightening and pneumatic flattening carriage, automatic front rest, control stand and control box. The machine is operated by a PLC, the programmable controller.
Product Description:
The operator removes the finished panels from the row of clamps on one section and refills this section with glue-edged stock. The operator then presses the Auto-start button. The automatic carriage travels to flatten the panel and tighten the clamps one by one to the end, then the next section is turn and laid on the front rest. The automatic carriage again travels forward to the other side, loosening clamps one by one until it stops. The automatic cycle is then repeated.
With different gluing jobs, the clamp tightening hydraulic pressure can be adjusted from 25 kg/cm2 to 70 kg/cm2.
Product Description:
Model ACP-20638-100 PN Horsepower 2 HP section 20 Clamp depth 38" Machine Weight 7550kgs Machine dimensions(cm) 432 x 360 x 302 Packing dimensions(cm) 330 x 105 x 140 120 x 110 x 190 130 x 130 x 120
Product Description:
The machine is an upgrade from the pneumatic type clamp carrier, with two units of hand hydraulic wrench to tightening clamps. A simple push or pull on operator will engage tightener with clamps for tightening or loosening.
The two hydraulic wrenchs mounted on front rest can slide smoothy from clamp to clamp. Similarly, two pneumatic panel flatteners mounted on overhead beam are also slided smoothly to flatten the panels while clamps tightening.
The hydraulic clamp tightener is powerful, quiet, lightening torque adjustable.
The hydraulic wrench is automatically push or pull, engage to
Product Description:
The finger joint assemble press operated with the combination of hydraulic and pneumatic system, assembling press length up to 4600mm, except the wood piece infeed and cut off are operated manually, entire jointing process are automatically operation, power hydraulic assembling press provide excellent jointing products output.
Product Description:
This machine is specially designed for drilling both ends of workpieces. This machine is driven by hydraulic system. Loading, drilling and unloading the workpieces are full-automatic operation. The rotation of drilling-head is driven by motor. The rotary speed can be changed if need. The drilling-head is high precision grade that enables the drilling performance to be stable. The location stop rod can adjust the drilling depth accurately. Double ends drilling can be fulfilled simultaneously. One end drilling operation is also available. The drilling speed can be adjusted accordi
Product Description:
Adopt low voltage (DC24V) and dust-proof electric control system. The hopper feeder is pneumatic control and the tailstock is driven by hydraulic pressure to clamp the workpieces. There are Round Shaving Knife and Guide Ring to support the workpieces when cutting. That will enable the cutting performance to be stable and more accurage. Equip with two sets of copying device. One is copying device, which is driven by pneumatic system and adopts U-cutting tools. Another one is sample-copying device by hydraulic system and adopts V-cutting tools. This machine uses 3 different types of cu
Product Description:
The machine can cut straight and spiral grooves on workpieces. Equip with pneumatic rotary cylinder, which can work with gear for accurage dividing. The transversal travel number of the cutter-head can be set by the control box. The rotary speed of cutter-head is controlled by inverter. The cutter-head is driven by hydraulic motor and ball screw. The machine can equip with hopper feed system fro full-automatic operation. The carriage's longitudinal movement is pneumatically operated, so that cutting performance will be stable. Install an automatic lubricator to lubricate