Product Description:
HD-806AC 1.Performs dual functions - oil extracting and draining. 2.The oil flow is visual through a clear cup. 3.Filter net screens out impurities to protect the motor and the pump. Machine service life is prolonged. 4.Oil is driven by the motor pump; therefore, the oil can be extracted immediately. It differs from the vacuum type in that the extracting procedure is to vacuum the tank first, and then to extract the oil. 5.It can be used for extracting engine oil, transmission oil, gear oil, and lubricant. 6.A 520mm, extra large draining bowl prevents
Product Description:
1.Use chemical cleanser to clean the system. 2.Adjust pressure as needed. 3.Double-filter design: Filter out dirt during cleaning.
Product Description:
HV-08W 1.Carbon removing agent is stored with 120£p *180L, 2L stainless steel tank to store carbon-cleaner. A special device is used to produce foam so as to avoid this canned product being discarded after use. It is both environmental protective and economic. 2.The foam can extend the washing time and soaking time so that every corner of the combustion room, branch pipes, etc¡K can be cleaned. 3.It is a portable type, light and handy. Inexpensive designing is widely accepted and used for car repair, DIY and fast maintenance shops.
Product Description:
HB-08 1.Extract oil by vacuum. The master pump won¡¦t be damaged. 2.Will not have a brake oil spraying and pollution problems as found in the master compressors, which may have leakage caused by the connecting lid or air pressure. 3.It doesn¡¦t have the problem for new and old type car on selecting the master pump lids. 4.Drop oiler (optional accessory) can supplement oil automatically. One man can operate it. Time and labor can be saved. 5.Oil is extracted by vacuum. The vacuum strength viewed in connected gauge is adjustable by inlet a
Product Description:
DV-60 1.Neither heating nor noises of high speed turning from the vacuum cleaner-The machine can continuously work. 2.Oil extracting and draining is driven by air pressure so as to avoid slant pour. Operation is easy. The machine is light and handy. 3.The vacuum and the pressure can be stored , and released at any place. 4.The pressure tank can jet liquid or air to clean the machine. 5.Special air inlet design for the tank bottom can drain the impurities, grains and metal chips. 6.The machine will stop extracting automatically when the oil i
Product Description:
DV-60FA 1.One machine can work whit two kinds of motive powers-either air pressure or motor-driven depends on the occasion. 2.Not only can extracting the waste but also separating fluid and dirt at the same time. 3.This product functions include vacuuming dust and metal shaving also extracting oil and CNC cutting Fluid. Dusts and shaved metal waste are suck out by high-speed motor, which has strong suction. 4.The design of pressure tank discharges by air pressure, repeatedly extract and discharge oil and fluid to clean machines and flush oil grooves. 5.Filter repeatedly leaches impurities of
Product Description:
HV-201 1.Open design without an oil reservoir tank.¡C 2.Oil filling and extracting are driven by a pneumatic motor pump. No contact between the oil and the air, preventing the oil from been emulsified. 3.Continuous, variable refilling rates can be controlled by the oil gun or the gas inlet valve. The operation is simple and convenient. The oil refilling gun is a standard component. 4.An electronic flow meter can be attached to measure the volume of the refilled oil. (Optional accessory) 5.Open design without an oil reservoir tank. A 5-gallon oil tank c