Product Description:
Casing ----- End suction, vertically split, JIS5K flat-face flange, bolted and casketed to motor flange. Discharge connection provides four(4) 90˘Xintervals of rotation for suitable choice . Gray cast iron is standard; 304SS & 316SS available on special order. Impeller ----- Fully enclosed, single suction design, statically and dynamically balanced. Bronze is standard. 304SS and 316SS available on special order. Mechanical Seal ---- Standard type, leak-proof for clean water operation. Particular seals on request.
Product Description:
Horizontal, vertically split casing, multistage, The casings are sealed by flat gaskets and held together by tie bolts, standard type is Horizontal suction vertical discharge, vartical suction and discharge is acceptable, with balance disk, and renewable shaft sleeve in teh region of the shaft seal. Uncooler stuffing box are used for temperature up to 80˘J, cooled stuffing box are used for temperature up to 260˘J
Product Description:
Vertically split casing, Horizontal Suction, Vertical discharge, bearing are enclosed in two bearing housings, flanged onto each end of the PUMP, The rotating assembly is hydraulically balanced by means of balance holes, at the rear of impeller ,"MT" Type has Balancing Disk, the residual axial thrust being absorbed by ball bearing at discharge side. Cooled stuffing box are used for temperature up to 80 ˘J cooled stuffing box are use for temperature up to 260˘J.
Product Description:
The AMXI series uses a metallic outer casing and a volute made from engineering plastic to provide the required structural strength as well as the needed corrosion resistance. The geometry of the impeller and casing are specially designed using fluid dynamic computational analysis software to attain operational efficiency. Creative dynamic buffer designed for isolating vibration during operation, increasing the effective surface contact between the thrust ring and the wear ring, thus minimizing fatigue failure. Patented bi-lateral cooling system enable rapid heat dissipation, enabling be
Product Description:
Designed in accordance to ISO2885, 2084, 3661 and 5199 standards. Cast iron casing with internal lining in PVDF material that is rugged in construction with superior chemical corrosion resistant. Rare-Earth magnets are used in the magnet coupling.
Product Description:
Offering various pipe connection options: union, flange and direct hose connection. Both the epoxy-coated bracket and the stainless steel base plate are carefully integrated to masimize its structural strength againts additional loading from the piping system, Equipped with IEC standard motor, with IP54 or IP55 protection and F class isolation. Parts that come in contact with chemical fluid are made of corrosion resistant material. PP+GF or PVDF material can be selected based on the corrosive properties. Simplified structure with minimum parts simplifies repair and maintenance.
Product Description:
MODEL BPS-80 OUTPUT 1/10 HP , 80 W OUTLET 19 mm , 3/4" RATED H 3 (M), Q 20 (l/m) MAXIMUM H 4.5 (M), Q 40 (l/m) DIMENSION 134 L X 134 W X 232 H (mm) WEIGHT 2.3 KGS