|
| |
| |
|
| |
| |
 |
|
Internal PLC .
Use 320¡Ñ240 LCD to design the screen suit for any requirement, and providing dynamic point function.
User can use 10000 variables to calculate such as plus, minus, time, divide, AND, OR .
Motor speed has many groups of mode to set, and it can be adjusted by machine. Acceleration/deceleration set:4 msec~1 sec,there are also S curve and linear to choose.
Standard I/O 24 INPUT¡B16 OUTPUT¡B2 sets of high speed INPUT (50u sec). Enlarge I/O to 32 INPUT¡B32 OUTPUT.
2 sets of ANALOG OUTPUT and 2 sets of ANALOG INPUTsignal providing axis control.
According to PLC, user can define the keyboard by himself.
Interpretation up to 7 orders, responsive speed up to 1000 Kpps.
Master/slave mode¡GController will adjust the speed of following axis(slave) with the speed of the main axis(master)and the MCM settings. At the connection of 2 sections, the speed will not be zero and changed to the required speed directly.
Passive ENCODER added is available. Controller can confirm the feed-length according to the feedback of passive encoder. It also can be used to the fly-cut.
512K byte of program memory. If the program is too big, user can use the function of DNC.
1-4 axis voltage-driven servo motor can be controlled.
Through RS232 interface, the controller can refresh the system data and supervisory control by PC . Max speed is 38K.
Through RS232 interface, user can use touch screen. |
|
|
|
|
| |
|
|
| |
| |
 |
|
