Rolling edge-banding belt thickness ｡｡0.4-3 mm Rolling edge-banding belt height ｡｡15-63mm Workpiece thickness ｡｡10-60 mm Minimum width ｡｡80 mm Minimum length ｡｡160 mm Feeding speed of workpiece ｡｡｡ﾜ15 m/min Air pressure ｡｡0.7 Mpa Edge-cutting motor ---0.37kw x 2 (12000rpm｡｡200HZ) Edge-trimming motor ｡｡0.55kw｡ﾁ2 (12000rpm｡｡200HZ) Edge-removing motor ｡｡0.75kw｡ﾁ｣ｲ (12000rpm｡｡200HZ) Edge-polishing motor ｡｡0.37kw｡ﾁ2 (1400rpm｡｡ 50HZ) Workpiece feeding motor ｡｡1.5 kw｡｡1400rpm 50HZ Glue box heater ---9x0.4kw Auxiliary Heater ｡｡0.12 kw Total power capacity ｡｡9.3 kw M
Product Description:
Model No.: MT130R-R-R-R Working width: 50-1300mm Working thickness: 3-100mm 1st unit motor power: 22kw 2nd unit motor power: 22kw 3rd unit motor power: 18.5kw 4th unit motor power: 11kw Feeding motor power: 2.2kw Lifting motor power: 0.37kw Cleaning brush motor power: 0.37kw Vacuum device motor power: 7.5kw x 2 1st sanding belt speed: 18m/s 2nd sanding belt speed: 18m/s 3rd sanding belt speed: 18m/s 4th sanding belt speed: 9m/s Size of sanding belt: 1315x2620mm Feeding belt speed: 4-21m/min
Product Description:
Model No.:MTFM230B Motor: 750W, TEFC Fan diameter: 230mm Inlet diameter: 100mm Number of intake holes: 1 x 100 Air speed 50Hz: 500CFM/14.15m3/min Air speed 60Hz: 600CFM/16.98m3/min Bag diameter: 370mm Bag height: 640mm Bag volume: 0.057m3 Net weight/gross weight: 30/33kg Packing size: 760 x 450 x 460mm 20' container: 195units
Product Description:
Model No.:MTW62-RFC50-9 Diameter of roller: 50x500mm Operation height maximum/minimum: 940/670mm Net/gross weight: 36/38kg Maximum holding weight: 130kg Measurements: 61.5 x 58.5 x 36cm
Product Description:
Model No.: MTMS3840ChiselCapacity:6-26mm(1/4?-1?)Max.Mortising Depth:76mmMax.Chisel Travel:210mmDrill Chuck Capacity:3-16mmTravel in Front and Behind:145mmTravel in Left and Right:320mmSpindle to Fence(max.):140mmChisel to Table(max.):210mmTable size: 400×150mmOver Height:1720mmMotor：750w Spindle Speed：1400(50Hz)/1720(60Hz)rpm Packing Size: Machine：560×460×820mm Stand：500×400×630mm G.W./N.W.: Machine：113/108kgsStand：8/16kgsUnits/20?Container：83pcs
Product Description:
This machine is a callback equipment of waster and old plastic, suitable for the crushing and granulation of injection runner of engineering plastics' scrap and inferior, and is suitable for crushing various plastic doors and windows, decoration boards and foam plastics, or crushing and granulation of plastic pipes and special-shaped materials either. Adopt sound insulation device, with little noise. The power adopts demountable blades, which can be removed and grinded after dulling; Suitable for crushing vast soft, hard and foam plastics.
Product Description:
This machine is auxiliary equipment for PP/PE film granulating and recycling. With the heat originated from high friction, this machine can make the soft and loosen film become solid, so they can easily enter the extruder to get large capacity. With the certification of ISO9001 and CE.
Product Description:
The double rank granulating unit is especially for PE, PP film and solid material granulating & recycling. With double vent, it can accept moist raw material. With the certification of ISO9001 and CE.
Your search for " " has found products.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
