Product Description:
Web Inspection Rewinders- The Web Inspection Rewinder WIR 300 is primarily used to screen pre-printed material for defects such as mis-register, blade lines, shade variations etc. by means of a full width stroboscope/Web Video/Defect Detection System. The defective material is removed and only good copy is rewound to provide a 100% defect free reel for downstream processes.
Specific benefits - Speeds of upto 300 m/min, Compact layout, shaftless unwind and rewind sections, full width stroboscope, digital edge guide equipment, trim extraction unit.
Product Description:
Doctoring and Re-reeling machine
The function of the DRM 300 in it basic form is to salvage badly rewound coils produced on the Slitting and Rewinding Machine which would otherwise be liable for rejection due to reasons such as telescoping, loose winding and bad edge finish. The inclusion of this machine in the finishing section of a converting unit enables High speed and continuous operation of the Slitting and Rewinding Machine and its relevance is increasing with the rising standards of the Flexible Packaging and Converting Industry.
Product Description:
Slitting rewinding machine- Rear loading version
DSR RL 400 (Rear loading version)-Integrated with the main machine and on the side opposite to the Rewind shafts
Slitter Rewinders to convert Plain/ Printed/Coated/ Co-extruded and Laminated combinations of base materials such as Paper, Plastic films such as OPP, PET, CPP,PVC, POF and Aluminum foil.
Specific benefits- High speeds of 400 m/min and reasonably big diameters on the Unwind and rewind in a compact machine layout.
Product Description:
Slitter rewinder- Front loading version
FL 400 (Front loading version)-Integrated with the main machine and under the Rewind shafts
Slitter Rewinders to convert Plain/ Printed/Coated/ Co-extruded and Laminated combinations of base materials such as Paper, Plastic films such as OPP, PET, CPP,PVC, POF and Aluminum foil.
Specific benefits- High speeds of 400 m/min, compact, ergonomically conceived, operator friendly with good all round accessibility, requiring minimum operator movement.
Product Description:
Slitting and rewinding machine- Overhead path
ULTRASLIT OHP 500 Free standing on a separate Unwind frame and on the side opposite to the Rewind (Overhead web path)
Slitter Rewinders to convert Plain/ Printed/Coated/ Co-extruded and Laminated combinations of base materials such as Paper, Plastic films such as OPP, PET, CPP,PVC, POF and Aluminum foil.
Specific benefits- High speeds of 500 m/min, reasonably big diameters on the Unwind and rewind, hygienic environment for food grade substrates, Area for on line web inspection, easy web threading, excellent accessibility to machine co
1.The method for cutting billets is cutting from up to down. 2.This equipment has the function of aluminum billet saw and operates in coordination with LPG direct fire billet heating furnace. You can adjust the length of billet quickly and do all the processes at one time. Thus, it can save manpower cost for cutting aluminum billet. 3.The rest aluminum billet can be connected to next billet so it can retrench loss of 5mm billet each time. Thus, there will be no waste material. 4.You can change different quality of aluminum billets which are the same size as
Product Description:
Introduction: Type: Tunnel Continuous type Method: Both sides direct fire heating Advantage: Temperature rising speed is fast. It is less fuel, equal temperature, stable, exact temperature. It fits in with fewer amount and multiple demands nowadays. Whole systems are automatic control. Charging from up and discharging from down, temperature inspection, and fire control are controlled by USA ALLEL BRADLEY PLC and HML PANEL.
Product Description:
Introduction: 1. This equipment can put a lot of billets on the storage table and continuously cut billets. 2. This equipment uses PLC electricity automatic control and it is easy to operate. 3. Cooling cutting oil automatically supply and stop. 4. It can depend on the billet length and material to adjust the cutting length and speed. 5. Cutting diameter of Billet: £p3¡¨~£p8¡¨;£p3Ѕ¡¨~£p10¡¨ 6. Cutting one cycle time: £p3¡¨~£p6¡¨ about 12 seconds; £p7¡¨~£p10¡¨ about 30 seconds
Product Description:
Automatic Handling System- Flat Transfer Type
Description: This equipment consists of Initial table, Roller Sleeve Raise/lower conveyer (Adjustable speed), Run Out transfer table (Flat Transfer Type), Cooling table (Flat Transfer Type), Stretcher, Stretcher Transfer table (Flat Transfer Type), Storage table (Flat Transfer Type), Sawing Transfer Table (Roller Sleeve Type), Product sawing table, Length gauge table, automatic control.
Feature: It is used for big machines such as 2200UST ~ 2750UST. Because big profiles are heavier and there is no belt slippery problem for Flat transfer equ
Your search for " " has found products.jpg)
(1).JPG)
.jpg)
.gif)
.JPG)
.JPG)
