Product Description:
Swiss Type Lathe Syntec N/C controller Front-side and Back-side(Center and off-Center) drilling and tapping Composite turning,drilling,milling and tapping 4 axes turning(x,y,z,z2) Main & Sub(caxis) can work with side-milling Flat Bed Structure Spindle dividing of 4¢X / 1000
Product Description:
Swiss Type Lathe Syntec or Mitsubishi N/C controller Front-side and Back-side drilling and tapping, milling Built-in Motor Composite turning, drilling, milling and tapping 5 axes turning (x,y,z,x2,z2) Flat Bed Structure Spindle dividing of 4" /1000 Synchronous or Simultaneous Turning available
Product Description:
Hydrondyamic Effect If the spindle speed is zero, the hydrodynamic support is zero and the bar rests on the feed tube. The revolving bar products increased oil pressure ang the bar is lifted from the bottom of the feed tube. With increasing speed, the hydrodynamic force increases and the bar revoves centrally ensuring a smooth feed.
Product Description:
Meehanite cast iron construction with internal heavy duty ribs diminish vibration and ensure rigidity. Designed for easy elimination of chips. 30¢X slant beds integrate entire structure, eliminating vibration and promoting overall stability. Both X and Z axes employ a broader box way, hardened, and precision ground. TURCITE-B Teflon coated linear slide ways allow greater surface contact, reduce wear and enhance processing stability. Ball screws ranked C2 and C3 respectively at X and Z axes, reducing vibration and limiting discrepancy.
Product Description:
Capacity Table Sizes 150 ¡Ñ 460 mm Longitudinal Travel 480 mm Cross Travel 170 mm Spindle Center to Table Surface 460 mm Magnetic Chuck Size 150 ¡Ñ 450 Longitudinal Feed Manual Travel 530 mm Automatic Travel 510 mm Table Traverse Rate 5~25 M/min Cross Feed Manunal Travel 180 mm Automatic Travel 170 mm Automatic Feed (variable) 0.5~10 mm Hand Wheel Per Revolution 5 mm Hand Wheel Per Graduation 0.02 mm Micrometric Adjustment Per Revolution 0.2 / 0.001 mm Vertical Feed Hand Wheel Per Revolution 1 mm Hand Wheel Per Graduation 0.005 mm Micrometric
Product Description:
Spindle Spindle Nose ISO A2-5 Chuck Dia. F48 Collet Chuck 6" AC Spindle Drive Motor AC 7.5 kw/10 HP Spindle Speed 6000 rpm Travel Max. X-Axis Travel 350 mm 125 mm Max. Z-Axis Travel 250 mm 320 mm X-Axis Rapid Traverse Speed 20 m/min 20 m/min Z-Axis Rapid Traverse Speed 20 m/min 20 m/min Least Input Increment 0.001 mm 0.001 mm Motor Coolant Pump Motor 1/4 HP 1/4 HP Lubrication Capacity Time Adjustable Time Adjustable MACHINE Machine Dimension (L¡ÑW¡ÑH) 2,200 ¡Ñ 1,450 ¡Ñ 1,600 mm 2,200 ¡Ñ 1,450 ¡Ñ 1,600 mm Floor Space 2,700 ¡Ñ 1,600 mm 2,700 ¡Ñ 1,600 mm Machine Wei
Product Description:
Standard Accessories Tool Holder for Outer Work¡Ñ6 Tool Holder for Boring Work¡Ñ4 Tool Holder for Face Work¡Ñ2 1-set of Hard Jaws; 1-set of Soft Jaws Alarm Lamp Adjusting Tools and Tool Box Working Lamp Foot Switch Chip Conveyor and Chip Bucket Bar Feed Interface Machine & Control Manuals Precision Check Data
Optional Accessories Bar Feed 3-Jaw Hydraulic Chuck Power Turret Part Catcher Transformer Bar Feed Power Turret Transformer Tool Presetting Probe
Product Description:
Extended spindle nose minimizes interference between headstock and workpiece while allowing a wide range of machining applications. X, Y and Z axes contain highly accurate, rugged linear guideways to assure rapid axis traverse while maintaining precision and accuracy. Single piece cast base and saddle promote durability, accuracy, reduce backlash and guarantee accurate positioning and feeding. Large capacity tool magazine accompanied with rapid tool change and random access selection, save time and offer higher productivity. State-of-the-art floating drawbar efficiently protects s
Product Description:
Compatible with belt, direct or built-in drive Robust cast iron on all major machin Linear guide ways on X, Y, Z-axes. Availability of armless or arm type tool Right and left side doors open for chip cleaning
Major machine parts such as base, saddle, table and column are founded from the highest grade cast iron for toughness and excellent vibration absorption. Linear guide ways on X, Y, Z axes ensure high speed travel and reduce moving friction to achieve positioning accuracy. High precision and pre-tensioned ball screws are used on 3 axes to increase accuracy and reduce
Product Description:
The next generation machining center LG-2500 was successfully launched by KAMIOKA in 2011 Spring. For breaking througn the limitation on structure and cutting performance of conventional moving-column, moving-bridge and moving-table machinery, KAMIOKA R&D team has completed this fine creation! One piece L-shape base-foundation and working table has approved for international patented design Compact machine configuration is designed for less space occupation than traditional moving-table machining centers Better accessibility and higher production efficiency than traditional moving-bri
Your search for " " has found products.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
