Product Description:
1. It's a WEDGE-HOOK type 2-jaw with the large through-hole. 2. Matching surfaces of all parts hardened, ground and lubricated directly. 3. Construction of high rigidity and high clamping accuracy.
Product Description:
TK High Speed Light Weight Type 1.Super short form, light weight large Through-Hole, just as 2/3 of typical model length. 2.Built-in check valve which prevents the internal pressure from sudden declining so that the workpiece will not fly out and cause a serious accident. 3.Can screw it from the rear end of the cylinder when mounting.
Product Description:
RK High speed Short Type 1.For short form, light weight and high speed rotary cylinder. 2.Built-in safety check valves. 3.Can screw it from the rear end of the cylinder when mounting. 4.The drain port should be independently connected to oil tank to avoid back pressure.
Product Description:
CP 2-Jaw Synchronous Clamp With Long Jaw Stroke. 1.It's a CRANK type 2-jaw with extra long jaw stroke. 2.Matching surfacess of all parts hardened, ground and lubricated directly. 3.Construction of high rigidity and high clamping accuracy.
Product Description:
FA Single Slide 1. Feed mechanism is transmitted by Rack and Piston, with steady feed speed. 2. Simple adjustment for feed speed and stroke. 3. Matching surfaces of all parts hardened, ground and lubricated directly. * Suitable for using with RS-N type cylinder.
Product Description:
ˇ§Overload Protectorˇ¨ is equipped in Press machine to check hydraulic pressure of cylinder inside the slider. If happen overload, the hydraulic pressure of cylinder will be released immediately within 3/1000 seconds. It has pressure control valve inside of overload protector, which can adjust hydraulic pressure automatically and eliminate the impact of rising pressure (which cause by oil temperature rise) in pressing process.
Product Description:
ˇ§Quick Die Change Systemˇ¨ can help to change die/mold in a short time. It replaces the traditional method which used the screw to fix the die/mold. To insure the safety of operation, the movement between each equipment will be pined down mutually.It has the function of inspection pressure and can be interlocked with the machine.
Product Description:
ˇ§Quick Mold Change Systemˇ¨ is for Injection Molding Machine and Die Casting machine. It adopts four independent circuit of cross clamping to clamp the mold. Each hydraulic circuit is with the function of maintaining pressure for a long time. The desired pressure is not affected by power failure or reduction in air pressure. In order to save time for the mold change and ensure the operation safety, it is just in time to apply Qucik Mold Change System.
Product Description:
ˇ§Air Driven Hydraulic Pump Unitˇ¨ use air to drive hydraulic pump. Once outlet hydraulic pressure reached setting pressure, it will stop driving and wonˇ¦t waste energy. If pressure reduce, it will add automatically. It can maintain pressure for one year. It is used for slide lock, feeder, stick release and hydraulic pressure supply system which needs to maintain pressure for a long time but less operate.
Your search for " " has found products
.jpg)
.jpg)
