Product Description:
The particular design of toggle mechanism allows the application of the dynamic force concentrated on the centre of the moving platen, eliminating deflection and distributing the clamping force evenly over the entire mould surface.
Product Description:
DNT is a dual-color injection molding machine with two injection units enabling the use of two colors at the same time which cuts secondary processing time.
Product Description:
Direct hydraulic clamping injection molding machine is designed without toggle mechanism that enable to avoid the toggle wear. This model can increase the position accuracy and is good for high technology and high precision plastic products.
Product Description:
Direct hydraulic clamping injection molding machine is designed without toggle mechanism that enable to avoid the toggle wear. This model can increase the position accuracy and is good for high technology and high precision plastic products.
Product Description:
DNT is a dual-color injection molding machine with two injection units enabling the use of two colors at the same time which cuts secondary processing time.
Product Description:
Clamping force(at 90kg/cąT) ton 30 Tie bar diameter mm 50x6 Die platen size(HxV) mm 460x480 Between tie bars(HxV) mm 280x280 Max. Die stroke mm 193 Die height mm 100~350 Nozzle touch force ton 3 Nozzle break stroke mm 150
Product Description:
Clamping force (at 90kg/cąT) ton 130 Tie bar diameter mm Ą@80x6 Die platen size (HxV) mm 680x634 Between tie bars (HxV) mm 400x400 Max. Die stroke mm 293 Die height mm 90~495 Nozzle touch force ton 5.4 Nozzle break stroke mm 180
Product Description:
Tie bar diameter mm 100x6 Die platen size(HxV) mm 820x890 Between tie bars(HxV) mm 520x520 Max. Die stroke mm 400 Die height mm 200~600 Nozzle touch force ton 10 Nozzle break stroke mm 250
Product Description:
Tie bar diameter mm 135x6 Die platen size(HxV) mm 1070x1070 Between tie bars(HxV) mm 695x695 Max. Die stroke mm 500 Die height mm 300~700 Nozzle touch force ton 13.3 Nozzle break stroke mm 300
Product Description:
Tie bar diameter mm 85x6 Die platen size(HxV) mm 700x670 Between tie bars(HxV) mm 445x415 Max. Die stroke mm 362 Die height mm 150~500 Nozzle break stroke mm 180 Max. Injection force ton 11.4 Max. Injection stroke mm 180 Standard plunger tip dia. mm 70 Total net injection amount(Mg) gr 588 Melting pot capacity(Mg) kg 250 Nozzle position(Center lower part) mm 0, -100 Ejection force ton 8.9 Ejection stroke mm 90 Casting cycles(Free) cycle/hour 780 3 Phase induction motor kw 25 Machine weight ton 12
Your search for " " has found products
.jpg)
.jpg)
