Product Description:
Bed is made of meehanite and precisely ground , Hardness is HS 70 degree. Auto matic and manual forced Lubrication pump supplies oil to cross slide and bedways. Oil distributor may be adjusted to lubricate bedway,cross slide,or both.. Starting lever with safety device. Emergency foot-operated braking system.
Product Description:
Gang type table saves work time of tool's feeding , changing and return. Using tool holder when the workpiece are various kinds and small quantity. When the workpiece wanna be changed,only alter programs. It is more convenient and economical than automatic lathe and automatic turning machine. All sets of special subplate can be changed. Setting all of tools on subplate in advance is suitable for long-rang and large quantity processing. Don't alter the tools one by one, only replace the subplate when change workpiece. Saving large time or tool test.
Product Description:
1.This machine is to test the rupture condition when motionless. 2.Dimension of machine: 905x500x1690 m/m. 3.Weight of machine: 245kgs
Product Description:
1.This machine adopts with wind pressure system available for grinding Slope and without slope pipe type of sticks. 2.To press stick is controlled by wind pressure, it can grind sticks continuously if the balance is regulated well. 3.Grind and polish any pipe type of stick in order to polish surface well. 4.Auto-feeding and discharging, auto-grinding, auto-counter, multi-memory for long/short work-piece grinding and feeding time. 5.Will 4" x 54" water band.
Product Description:
1.This is a horizontal type OPP TAPING MACHINE available for binding compound cloth and iron core by OPP tape. 2.Save labor, easy to operate, lessen breakdown and low noise, easy to maintain. 3.The supporting roller is at the same shaft, it can be kept in stable when running. 4.t can be regulated by hand before trial, then turn the automatic after stabling. It is installed with emergency brake and pedal brake, safe to operate. 5.Easy to set up the bending extension, can be set up freely depending on the products and material of OPP belt.
Product Description:
1.This is a Mandrel Extractor which is available for drawing out the iron core mold. 2.Add improvement to a traditional machine to run quickly and save labor. 3.Two types of Hydraulic drawing mold machine, Automatic and Manual, which can be optioned freely. It is safe to make use of pedal operation. 4.Pressure regulator and pressure meter are installed externally in order to regular it conveniently. 5.Exclusive for slope, the Unlimited length. It is based on the working length if there is no slope.It can be made as customer's request. 6.Chain type Hydraulic drawing mold machine can d
Product Description:
1.his machine is available for cutting both sides of stick at one time. 2.With wind pressure flush. Automatic or manual operation is selectable. 3.With diamond saw for cutting stick. 4.Specially cut the pipe type of stick. 5.Can adjust the length, auto-feeding with counter, and alarm system. 6.Save labor, lessen breakdown, simple to operate.
Your search for " " has found products
