Product Description:
1. The remote reading water meter is fitted with the reed relay to generate the pulses. The pulses are transmitted to the electronic type totalizer, which is installed in the control room of the water works. Then the readings of the above totalizer would be the same as the reading of the water meter. 2. Max, transmitting distance¡G2,000 meters.
Product Description:
(A) MATERIALS METER CASING:IRON CASTING WITH STAINLESS STEEL LINING REGISTER :PLASTIC ROLLER COUNTER PROPELLER :POLYPROPYLENE RESIN (P.P) GEAR TRAIN :PLASTIC OR BRASS (B) SPECIAL FEATURES: When the meter needs to maintain / repair, only disassemble its internal parts rather than the entire meter from the pipeline. Cover the meter with a blind cover so that water can flow continuously. (C) ACCURACY¡G¡Ó2% IN THE FLOW RANGE. (D) SMALLEST READABLE QUANTITY¡G0.01M3 .
Product Description:
Thickness of Forming Sheet: 0.3 ~ 0.8 mm , Forming Speed: 16~20 M/min , Roll Shaft Dia: 75~85 mm Dia. Number of Stands: 20 ~ 25 , Main Motor: 10 HP ~ 15 HP , Complete with mandrel type uncoiler and hydraulic cutting device , This machine is controlled by computer system with touch screen .
Product Description:
Thickness of Forming Sheet: 0.4~0.6 m/m , Forming Speed: 3 M/min , Roll Shaft Dia.: 75 mm (Dia.) , Number of Stands: 16~18 , Hydraulic Motor: 15 HP , Measuring device with one tachometer for length counting , This machine is controlled by computer system with touch screen.
Product Description:
Thickness of Forming Sheet: 0.6~1.2 m/m , Forming Speed: 12~16 M/min , Roll Shaft Dia.: 40 mm Dia. Number of Stands: 10~12 , Hydraulic Motor: 7.5 HP ~ 10 HP , Roll stands: 10 ~12sets of roll in SK2-hard chrome coated. Attached with cooling equipment. Complete with uncoiler, hydraulic cutting device and including run-out table. Measuring device with one tachometer and digital display read-out for 0-99999 mm .
Product Description:
YS-700A , Raw material width: 1250 mm max , Thickness of shearing sheet: 0.2 mm to 1.6 mm , Thickness of slitting sheet: 0.2 mm to 1.0 mm , Shearing speed: 18 m/min. , Complete with one set of cutting blade in SKD-11 Flattener with 5 pcs of parallel rollers. Flattener and shearing unit: 15 HP in hydraulic system. Complete with 5 sets of slitting blade in SKD-11 .
Product Description:
Machine size: 6.40m(L)x1.10m(W)x1.25m(H) . Thickness of forming sheet: 1.6 mm - 4.0 mm(depends on which model) . Forming speed: 15 m/min . Roll stands: rollers in SK2-heat treatment. Main motor: over 20 HP in hydraulic system . Complete with uncoiler and hydraulic cutting device and including punching hole device. This line is controlled by computer system with touch screen .
Product Description:
Thickness of Forming Sheet: 1.0~1.2m/m . Forming Speed: 12~16M/min . Roll Shaft Dia.: 60mm Dia. Number of Stands: 10~12 . Hydraulic Motor: 20HP . Roll stands: 10 ~12sets of roll in SK2-hard chrome coated. Complete with uncoiler, hydraulic cutting device and including run-out table. Measuring device with one tachometer and digital display read-out for 0-99999 mm .
Product Description:
Thickness of forming sheet: 0.3 mm ~ 0.8 mm , Forming speed: 20 m/min. Roll shaft dia: 75 mm dia in S45C , Roll stands: 20 sets of roll in SK2-hard chrome coated , Main motor: 10 HP in hydraulic system , Complete with whole set of laminated equipment on the top of rollformer. Attached with mandrel type uncoiler and hydraulic cutting device .
Product Description:
Thickness of Forming Sheet: 0.4~0.6 m/m , Forming Speed: 4~6M/min , Roll Shaft Dia.: 60mm Dia. Number of Stands: 8~10 , Hydraulic Motor: 7 1/2HP , Roll stands: 8 ~10sets of roll in SK2. Attached with one set of press mould for crimping used Complete with uncoiler, hydraulic cutting device. Controlled by computer system with touch screen.
Your search for " " has found products
