Product Description:
Use: ¡@1 Pre-treatment for drying moisture in matter. ¡@2. The timing and temperature of the furnace is set according to the properties and functions of the materials¡¦ coatings. This enables the thickness of the applied coating to adhere to the corrosive nature and reach demands after drying. (I.) External Mold: ¡@1. Tunnel Mold: Mountain Mold Furnace, Equal Furnace ¡@2. Box Mold: Suitable for small measurement and small output production. (II.) Heating Method: ¡@ 1. Heating Divergence Mode: Uses radiant heat such as fuel gas infrared boldface tubes. ¡@ 2. Heated Air Circulating Mode. (III.
Product Description:
(I.) Non-Solvent ¡@1. Can supply 100% coating (100% fixed-mold coat) ¡@2. Will not cause poisoning due to organic solvents and reduces environmental pollution. ¡@3. Will not ignite due to solvents and cause calamities. (II.) Can attain high performance coating (No needle apertures) (III.) Can attain high thickness coatings. Powder coating spray can attain a 50~300£g¢õ coating with only one spraying. (IV.) Small loss of coating. Powder coatings that do not adhere can be recycled and used.
Product Description:
1.Constant temperature and moisture air-conditioning system (ice water machine, heater, moisturizer, air conditioning box, water-cooling platform) Because of the airtight space in the dust-free room, the constant moisture system can detect the needs of materials and whether or not to add treatments. When personnel are in the dust-free room for extended amounts of time, it is recommended that the constant temperature air-conditioning treatment be added in order to maintain air freshness and cleanliness as well as the temperature in the dust-free room. 2. Personnel Air-shower The biggest sour
Product Description:
This facility uses electrode methods to control coating thickness within 10£g¡ã30£g and reduce coating costs. Moreover, it uses UF installation for second-time recycling, which allows the coating materials brought through the chute when coating not to be wasted. The electrode method can enable the adhesion on the coating of the coated objects to be increasingly difficult to fall off. Using the positive and negative poles to evenly absorb effective coatings will prevent the influence on the thickness of the coating from people¡¦s movements. Moreover, it can bring the best results into full play reg
Product Description:
¢°. The spray nozzle sprinkles evenly with a fan shaped sprayer or a solid cone shaped sprayer. It can satisfactorily accomplish the majority of industrial demands, such as rinsing, cleaning, moistening, sprinkling, cooling, and water curtains etc. ¢±. When the water pressure is 40 Psi, the sprayer¡¦s angle can reach 0¢X--110¢X (regarding angle of atomization and pressure). ¢².The sprayers¡¦ material properties have 303SS, 316SS, 316LSS, brass, plastic products, which can be chosen for use according to different requirements.
Your search for " " has found products
