Product Description:
The CFM-01B is same as CFM-01A, except of its mixing method. The mixing propeller is fixed at the bottom of mixing tank, the mixing principle is similiar to the fruit juice mixer. Therefore, less air comes into the chemical stream during the mixing which involves simple operation and high working efficiency.
Product Description:
1. Equipped with feeding conveyor system to save manpower and increase production. 2. Transmitted by mechanic, easy of operation and maintenance. 3. Wrapping films: cellophane, BOPP, COPP, Coated paper. 4. Equipped with Quicker Change-over System, easy adjustment for different product sizes
Product Description:
1. Equipped with feeding hopper to save manpower and increase production. 2. Transmitted by mechanic, easy of operation and maintenance. 3. Wrapping films: cellophane, OPP, Coated paper. 4. Equipped with Qicker Change-over System, easy adjustment for different product sizes.
Product Description:
1.Equipped with feeding conveyor, automatic feeding, sealing and cutting. 2. Direct heating type sealer, no smoke and tight closed. 3. Photo-cell devices installed to be sure of safety and packing size adjustment. 4. With automatic waste reel system. 5. Packing material PP, POF, PE, Center-Folded film.
Product Description:
1. Sealing jaws drived by cylinder. Put the product in right position when operation. Then press the auto-switch to start the sealing jaws. 2. This machine equipped with automatic transfer system. After sealing, the package will be sent to shrink machine automatically. 3. Impulse type sealing and cutting, has quick speed and saving electricity.
Product Description:
1. Actions of machine controlled by PLC programmable operation display, easy to operate. 2. Integral operation is made in the sequence of vacuum forming¡÷vacuum (gas flush)¡÷sealing¡÷cutting. 3. Quick changeover of molds. 4. Installed with Germany vacuum pump
Product Description:
1. This machine has up and down molds capable of forming PVC, PET, PP and PS cover, containers etc. 2. Equipped with automatic plastic roll feeding device for manpower saving. 3. Divided section heater temperature adjustment controlled by LSR switch can get the most even, stable and ideal temperature. 4. Equipped with fan and water cooling systems.
Product Description:
1. Equipped with upper and lower ceramic heaters for heating, rapidity of heating and power saving. Divided section heater temperature adjustment controlled by LSR switch, can get the most even, stable and ideal temperature. 2. Adjustable forming area can save material. 3. Pre-heating type and chain feeding material can save the running time, increasing the production. 4. The roll material cutting is adopted rodless cylinder. Safety and accuracy of cutting transmission. 5. The machine is designed for integral process of PVC, PET, PP, PS, PSP (ESP) etc. material with large production.
Product Description:
1. Automatic temperature control. 2. Continuous operation of roller converyor,speed adjustable. 3. Moisture proof capability can prevent products from dust moisture and thief. 4. Run with PVC, POF, PP shrink material.
Your search for " " has found products
