Product Description:
The SM-2001 auger type metering filling machine are suitable for all types of free-flow and non free-flow powder and granular products. The transmission system is driven by a servo motor. Touch-sensing screen for operation control. Japan Mitsubishi PLC. Auger pipe for material infeed is one-piece manufactured from stainless steel. Easy to install and dismantle the auger without need of any tool. Easy and convenient cleaning for time-saving. In case malfunction occurs, the machine stops automatically for protection. 20 sets of memory modules.
Designed for filling and metering various powder and granular products, such as flour, crude sugar, seasoning flavor, salt, MSG, chemical powder and biological powder, etc.
FEATURES:
The SM-2002 auger type metering filling machine is suitable for all types of free-flow and non free-flow powder and granular products.
The transmission system is driven by a servo motor.¡@
Touch-sensing screen for operation control.¡@
Japan Mitsubishi PLC.¡@
Loading capacity of material storage tank is 60L (Available to connect with a material supply system).¡@
Designed for automatic bag forming filling and packaging for various powder bags (small package) and handy bags.
FEATURES:
The STS-01 automatic bag forming filling metering packaging machine is suitable for all types of free-flow and non free-flow powder and granular products. ¡@
The machine is designed with a gusset type sealing mechanism, ensuring smooth appearance of product without pin-hole problem. No material exists at sealing position tha
The main function of a Twin Separator is to de-fiber and remove impurities quickly and effectively from the stock which just defibered by pulper roughly. It removes light and heavy impurities through a high density cleaner, strainer and a slit or hole screen basket. A single machine will thus be able to have the function of defibering, coarse screening and fine screening together. Hence, it simplifies the stock preparation system as well as enable the strainer of the pulper to be enlarged, which increases the capacity easily.
1. Assembling requires for small room and is possible in any place.
2. The cylinder is made of stainless steel with anti-corrosive property.
3. Due to the design of twin dewatering cylinders, the white water is discharged during the operation from the two sides of the two cylinders, thus the handling capacity per unit is higher than other models.
4. Due to the special design of cylinders, minimum power is required for maximized concentration capacity.
5. The machine is easier in operation with greater a availability of
1. Reject pump feeds paper stock into slush sorter.
2. Paper stock that has passed through slush sorter is fed into the following process.
3. Rejects are discharged intermittently.
4. In automatic operation, the inlet and the outlet of slush sorter close. Then white water is put inside under pressure to for feed rejects up to drum screen.
5. Water separated in drum screen returns to the pulper.
Product Description:
Characteristics : 1. The contaminants are removed without being pulverized to improve the fining operation. 2. The high-consistency processing facilitates the after-treatment process. 3.Small reject ratio scales lower than the tail screen. 4.The attached cleaner could take the place of the high-consistency cleaner. 5.Automatic reject discharge does not require manpower.
Operation Description¡G 1.The standard consistency at inlet is 3% ~ 4%. However, the consistency can be raised up 5%. 2.The standard diameters of holes on the strainer are 2 to 3 mm for waste newspaper and magazin
Product Description:
X-axis and Z-axis X-axis travel mm -50;+350 -50;+250 Z-axis travel mm 500 500 X-axis rapid travel m/min 12 12 Z-axis rapid travel m/min 24 24 Measurement LxW mm 2560x3200 2560x3540 Machine height mm 2845 2845 Net weight kg 5500x2 5500x2 Total power consumption KVA 35x2 35x2
Your search for " " has found products.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.bmp)
.jpg)
